- Leafield Marine’s factory fitting tools are used during the manufacturing phase to safely install our air valves
- Used together with a torque wrench. This will ensure that the correct tightening torque is applied every time when installing the valve.
- Avoid damaging the valve during tightening
- See our installation and service instructions for further information
Product Description
Leafield Marine supply all the tools required for safe and secure fitting of our air valves.
Our factory fitting tools are used during the installation and adjustment of our valves.
Please note, unlike with our tool kit spanner, a different version of the tool is required for each type of valve.
Make An Enquiry
Accessories and Service Tools
D7/C7 Factory Fitting Tools – 0710002
Used together with a torque wrench. This will ensure that the correct tightening torque is applied every time when installing the valve.
Avoids damaging the valve during tightening
Please refer to D7 Installation and Service Instructions
A9 Factory Fitting Tools Set – TM3120
Used together with a torque wrench. This will ensure that the correct tightening torque is applied every time when installing the valve.
Avoids damaging the valve during tightening.
Please refer to A9 Installation Sheet.
A6 Factory Fitting Tools – TMC1040
Used together with a torque spanner. This will ensure that the correct tightening torque is applied every time when installing the valve.
Avoids damaging the valve during tightening.
Please refer to Installation Sheet – 15439
B10 Factory Fitting Tool – TM2582
Used together with a torque wrench. This will ensure that the correct tightening torque is applied every time when installing the valve.
Avoids damaging the valve during tightening.
